ATR833A-II / P/N 833-II (Axxx)-(Axxx)
Operation and Installation
Doc.-No. 01.143A.010.71e / Revision 1.00
16
To assign a name to a memory entry,
the appropriate entry must be
selected. The next steps follow
directly step 4 from above.
5. Change of name entry:
A long press of the Cursor button
enables the entry of a name
ACT
118.275
SBY
>
123.450
MEM 07
6. Enter the name:
By
changing
the
selected
character
with
FREQ
,
and
advancing the selection with ►,
just as when manually entering a
standby frequency.
ACT
118.275
SBY
>
123.450
MEM 7
E D T Z
7.
Store the name:
The new entry is either stored with
a long press of
MEM
or by a short
press on the Cursor button
.
ACT
118.275
SBY
>
123.450
MEM 7
E D T Z
To exit the frequency list press the
SET
button or wait 10 seconds until
time-out.
2.4.6 ATR Frequency Tool
The ATR Frequency Tool from Version 1.3 upwards supports the
ATR833A-II. With the tool the frequency memory of the ATR833A-II can
be managed, i.e. frequencies can be added, edited and deleted. The
frequency list can be stored as a file.
The ATR Frequency Tool can be downloaded from the f.u.n.k.e.
AVIONICS homepage in the service area under Info / Download.
