BFI57 / P/N BFI57-(xxx)-(xxx)
Operation and Installation
Document-No.: 08.510.010.71e/ Revision: 3.10
8
Switch ON (press 1 sec, display may be somewhat delayed),
Switch OFF (press long),
Restart (press 10 seconds)
Toggle between Normal and Setup mode
Selection of three different display illuminations
HI
LO
all white / no grey
Change between the different pre-defined contents of the
third line
Normal Mode:
- short keypress: decrease QNH manually
- long keypress: select STD QNH 1013 hPa / 29,92 inHG
Setup Mode:
- Adjusting and selecting values
Normal Mode:
- short keypress: increase QNH manually
- long keypress: start AUTOmatic QNH determination
Setup Mode:
- Adjusting and selecting values
2.2 Switching ON/OFF
Depending onto the configured power-on behaviour (see 3.8.1), the
device is either turned on manually, or it automatically turns on when
aircraft power is applied.
After switching on, the following splash screen appears (may be
somewhat delayed):
e.g.
Company Logo
Device Type
Software-Version
Batterymanagement-Firmware-Version
If the capacity of the battery is significantly reduced due to aging, a “Bad
Battery!” message is indicated on the splash screen.
In this case the battery should be exchanged as
soon as possible, as otherwise the autonomous
operation cannot be guaranteed!
The device can be rebooted with pressing of
for about 10s.
f.u.n.k.e.
BFI 57
f.u.n.k.e.
BFI 57
Summary of Contents for BFI57
Page 2: ......
