BFI57 / P/N BFI57-(xxx)-(xxx)
Operation and Installation
Document-No.: 08.510.010.71e/ Revision: 3.10
10
The indication of the GPS track relies on the availability of the GPS
signal. In case there is no or bad availability the GPS track numerical
value is replaced by “---“.
When standing still (neither flying nor taxiing) no GPS track will be
indicated.
GPS reception (sufficient satellites available) can be
identified by the indications of GPS track and position (see
page 13).
Besides the numerical values of speed and rate of climb tape indicators
can be found additionally:
Tape indicator – Airspeed
The tape indication for the airspeed is located at the lower edge of the
screen. With respect to the colour bands printed on the device’s housing
below the screen one can determine aircraft specific velocity ranges.
Those ranges must be correctly defined in the device configuration (see
3.8.3).
Tape Indicator – Rate of Climb
The tape indication for the rate of climb is located at the right edge of the
screen. The range of the scale is adjustable from a pre-defined set of
values (see 2.5.2.6)
2.3.2 Elements of the Third Line
The variable content of the third line can be changed by pressing
several times.
After starting up the device, the third line shows the QNH and the
battery status by default.
The default view (QNH + Battery Status) can be accessed
from any of the following pages by a long keypress of
.
Summary of Contents for BFI57
Page 2: ......
