LED WORK LIGHT
To aid working in confined, inadequate
-
ly lit spaces, the LED work light
4
auto-
matically illuminates when the trigger is
activated.
FORWARD/REVERSE SELECTOR
The switch determines the direction of
rotation of the chuck, i.e. clockwise or
anticlockwise.
a. Stop the driver and push switch
2
to
the left or right.
NOTE:
When the di-
rection switch is pushed to the left,
the chuck will rotate clockwise. Be-
fore operation, check that the switch
is set in the required position. Do not
change the direction of rotation until
the chuck comes to a complete stop.
b. When the driver is not in use move
the direction switch to the neutral
position (the middle setting) to lock
the trigger out.
TRIGGER
When the trigger is depressed, the
chuck will rotate (pr
ovided the direc-
tion switch is set in the forward or
reverse position). This trigger switch
is electronic which enables the user to
vary the speed continuously. The speed
varies according to how far the trigger
switch is depressed. The further it is de-
pressed, the faster the chuck will rotate.
The lighter it is depressed, the slower it
will rotate.
HOLDING THE IMPACT DRIVER (IMAGE
1 & 2)
The impact driver casing is designed to
be held comfortably in two ways.
1. By the handle.
2. Or by the in-line support grip.
TROUBLESHOOTING
Problem
The driver does not work
Cause
1. Flat battery.
2. Forward/Reverse not
selected.
Remedy
1. Charge battery.
2. Select forward or
reverse.
NOTE:
Remove plug and/or battery be
-
fore carrying out any adjustment, ser-
vicing or maintenance.
MAINTENANCE
Regular inspection and cleaning reduc-
es the necessity for maintenance oper-
ations and will keep your tool in good
working condition. The motor must be
correctly ventilated during tool opera-
tion. For this reason avoid blocking the
air inlets.
HANDLING & STORAGE
Although this machine is small in size,
care must still be taken when handling
and lifting. Dropping this machine will
have an effect on the accuracy and may
also result in personal injury. This ma-
chine is not a toy and must be respected.
The environment will have a negative
result on its operation if you are not
careful. If the air is damp, components
will rust. If the machine is unprotected
from dust and debris; components will
become clogged: And if not cleaned and
maintained correctly or regularly the
machine will not perform at its best.
ENVIRONMENTAL PROTECTION
Recycle raw materials instead of dispos-
ing as waste. Machine, accessories and
packaging should be sorted for envi-
ronment - friendly recycling. The plastic
components are labeled for categorized
recycling.
WARRANTY
This product is warranted in accordance
with the legal/country specific regula
-
tions, effective from the date of pur
-
chase by the first user. Damage attribut
-
able to normal wear and tear, overload
or improper handling will be excluded
from the guarantee. In case of a claim,
please send the machine, completely
| English
10
CID 12V / 80 PLUS
Summary of Contents for CID 12V/80 PLUS
