background image

 

Do not commence installation until you have read and understood the instructions 
and warnings contained in this installation sheet.  If you have any questions 
regarding any of the instructions or warnings, please contact your place 
of purchase.

 

This mounting bracket was designed to be installed and utilised ONLY as 
specifi ed in this manual.  Improper installation or use of this product may 
cause damage or serious injury.

 

This product should only be installed by someone of good mechanical ability, 
with basic building experience and full understanding of this manual.

 

Make sure that the supporting surface (i.e. wall) will safely support the combined 
load of this bracket and all attached hardware (TV) and components.

 

If mounting to timber wall studs, make sure that the mounting screws are 
anchored into the centre of the studs. Use of a stud fi nder is highly recommended.

 

Always use an assistant or mechanical lifting equipment to safely lift and position 
equipment.

 

Tighten screws fi rmly, but do not over tighten. Over tightening can cause damage, 
greatly reducing their holding power.

 

This product is intended for indoor use only. Using this product outdoors 
could lead to product failure and personal injury.

 WARNING

IMPORTANT:

 Ensure that you have received all parts according to the component checklist prior 

to installation. If any parts are missing or faulty, contact your local distributor for assistance.

Wall plate (x1)

A

Left adapter 

bracket (x1)

B

Right adapter 

bracket (x1)

C

NOTE:  Please read the entire instruction manual before you start 

installation and assembly

Component Checklist

SLT-510 manual.indd   2-3

SLT-510 manual.indd   2-3

10/08/12   1:23 PM

10/08/12   1:23 PM

ST6.3x55 (x6)

W-A

Concrete anchor (x6)

W-B

D8 washer (x6)

W-C

Summary of Contents for SLT-510

Page 1: ...IOUS INJURY OR PROPERTY DAMAGE MAY OCCUR 200x200 300x300 400x200 400x400 55 MAX 70kg SLT 510 Use the tilt adjusting knobs to adjust your TV to the desired angle Maintenance Check that the bracket is secure and safe to use at regular intervals at least every three months Please contact your local distributor if you have any questions 4 Adjustment ...

Page 2: ...at the mounting screws are anchored into the centre of the studs Use of a stud finder is highly recommended Always use an assistant or mechanical lifting equipment to safely lift and position equipment Tighten screws firmly but do not over tighten Over tightening can cause damage greatly reducing their holding power This product is intended for indoor use only Using this product outdoors could lea...

Page 3: ... components When installing wall mounts on cinder block verify the actual concrete thickness is at least 35mm for using the concrete anchors Do not drill into mortar joints Be sure to mount in a solid part of the block generally 25mm minimum from the side of the block It is suggested to use the electric drill on a slow setting to drill the hole instead of a hammer drill to avoid breaking out the b...

Page 4: ... 2 Attach Adapter Brackets 3 Hang TV on the Wall Plate Position the adapter brackets as close as possible to the middle of the screen Ensure the Tilt Adjusting Knobs are located on the outside of the rails Screw the adapter brackets onto the TV Tighten all screws but do not over tighten SLT 510 manual indd 6 7 SLT 510 manual indd 6 7 10 08 12 1 23 PM 10 08 12 1 23 PM M A M B M F M C M D M C M D M ...

Reviews: