Ezviz X5S-16H, Quick Start Manual

Page: 9 / 98

3
Setup
Power on
1. Connect NVR with power outlet and turn on the power button.
Power Adaptor
Power Outlet
Power Button
Use stable power supply to avoid device exception or even damage.
2. Wait until the Wizard interface appears on the Monitor and set the password (For the first time access).
It is recommended to set new password for better security.
3. Log in the NVR.
• Admin password is the verification code on the lable of the device.
• If the wizard does not appear, please check the steps above.
(Optional) Shutdown
1. In the operation interface of NVR (Monitor), go to Shutdown by Menu Shutdown and click it.
2. Click Yes .
For device protection, do not turn off or disconnect the power supply while the device is working.