3
Step 2 Remove Insulation Strip
Take out the battery and draw out the battery insulation strip with your hand.
Insulation Strip
•
Please replace the battery in time when low power prompts on your phone.
•
If you need to replace the battery, please purchase one CR2450.
•
When replacing batteries, please insert with the positive side facing up
.
3� Add Temperature & Humidity Monitor
The Monitor should be used along with EZVIZ Zigbee Smart Gateway (afterinafter
referred to as "gateway"). Please add gateway to the EZVIZ Cloud by referring to the
gateway user manual, and then add the Monitor to the gateway by following the below
steps.
Method One: Add by Scanning QR Code
1. Log in to your account through EZVIZ app, tap the device adding icon and then
the QR code scanning interface will be displayed.
2. Press and hold the Button of the Monitor for over 5s till the signal icon on
Monitor screen flashes, and then the Monitor enters device adding mode.
Button
The Monitor will exit device adding mode automatically over 3 minutes.
3. Scan the QR code on the inner side of the cover or the cover of the user
manual, and then add the Temperature & Humidity Monitor to the gateway.
5. Add the Temperature & Humidity Monitor to the gateway by following the
wizard on the app.
6. Rotate tightly the rear cover of the Temperature & Humidity Monitor clockwise
till the aligning mark on rear cover is aligned with the mark on the front
cover.
