
ADer the camera App is installed on your phone and
the camera synced with your phone, use the supplied
screws and/or plugs to mount it in the desired
posion.
The camera is mul adjustable so you make sure
everything you need is captured and recorded. Make
sure you loosen the appropriate screws to adjust the
camera, then re-ghten.
DO NOT FORCE
OR BEND THE BRACKETS IN ANYWAY.
Installaon Guide
Smart Solar Camera Model SH339
INSTALL AND CONNECT THE MOBILE APP
1.
Download and install the
“TOSEE”
App from Google Play or the Apple store.
2.
Run the ToSee App. When asked permission for ToSee to know your locaons etc, make sure you
allow it. If you don’t, you will not get any noficaons to your phone.
3.
Click the “
+
” top right corner of the APP and “
Add Device
”
4.
Slide black the POWER switch on the bo9om of the camera to the “ON”
posion. (If its already ON, slide it to the OFF posion, wait 5 secs, then
slide it back to the ON posion)
5.
The LED on the front of the camera should now be slowly flashing
RED.
6.
If so, then select “THE RED LIGHT IS FLASHING” icon on your phone.
If the LED is NOT flashing RED, it has med out. You can now either press
and hold the RESET bu9on on the bo9om of the camera for 5 seconds
unl you see the front LED flashing RED, or you can slide the power switch
off, wait 5 seconds, then back on.
Before proceeding, make sure the camera is fully charged.
We also recommend to perform the following in exactly the correct order as described below: