
Installaon Guide
Smart Solar Camera Model SH339
BATTERY SWITCH
Slide this switch to turn the camera on or off.
RESET KEY
Press this bu9on during original setup, or press and hold for 5 sec to restore default.
TF CARD SLOT
Insert a TF card (not supplied) in order to record video.
USB
Use this port to charge the device with the supplied USB cable.
BRACKET
This is used to mount the camera on the wall. Use the screws and/or plugs supplied.
MOUNT
SPEAKER
Used for sending alert tomes and the voice intercom funcon.
Note: You need to remove the square silicon waterproof cover to access the
bo9om of the camera.
PREPARE THE CAMERA FOR USE
Your camera has the rechargeable ba9eries inserted and
ready to go.
Insert your TF card into the TF card slot.
Make sure you insert it correctly.
ie. With the TF card connectors facing up
and slide the TF card slowly unl it “clicks”
DO NOT FORCE THE TF CARD INTO THE SLOT. If it seems
difficult for the TF card to be inserted, you may have it
upside down.
Next, a9ach the supplied USB cable and charge the camera
for at least 20 hours. This is to ensure that for 1st use, the
ba9eries are fully charged. Subsequent charging of the
ba9ery is provided by the solar panel.
We recommend you DO NOT mount the camera on the wall at this me.
You should install the soDware App on your phone and make sure everything
is working first.