© 2005-2006 Ezurio Ltd
Data Sheet
1
2.
Features
Feature
Implementation
Wireless LAN Transmission
Complete stand alone device with on board flash
Drivers Embedded
802.11b/g
Protocol
TCP/IP IPv4 and DHCP
Range 100
metres
typical
Frequency
2.4 – 2.484 GHz
Channels
11 channels – USA
13 channels – Europe (excl France)
14 channels – Japan
4 channels – France
Max Transmit Power
+15 dBm @ antenna connector.
+17dBm from integrated antenna
+10 dBm limit for France and Hungary
Receive Sensitivity
-84dBm @ 2Mbps
Interface UART
Interface
Programmable
Real-time scripting engine
Data Transfer rate
Up to 2 Mbps (determined by UART)
Serial Interface
RS-232 bi-directional for commands and data.
16550 compatible. DTR, DSR, DCD, RI, RTS, CTS
Serial parameters
Default 115200,n,8,1.
Configurable from 9,600 bps. Default 921,600 bps
Security
WEP encryption 64 and 128 bit options, WPA, WPA2, SSL
Network support
Access Point
I/O
2 x 10bit ADC’s
9
GPIO
Current consumption
Less than 250mA (this depends on the data rate – 250mA is at
115kbaud) during data transfer with a configurable low power mode
Temperature Range
-40°C to +85°C (requires operation in powersave modes)
-30°C to +60°C (continuous operation)
Supply Voltage
3.3V – 5.0V
Interface Levels
3.0V Logic
Connection
Option: 40 way BISM II pin compatible Hirose connector
Lead free
Lead-free and RoHS compliant
Warranty 2
Years
The features described within this data sheet are those targeted for the first production
release of firmware. Note that not all of these features may be available within individual
releases of the Engineering Sample firmware. Check with the firmware release notes to
determine the supported functionality.