Ezurio WISMC01BI Manual Download Page 13

 

© 2005-2006 Ezurio  Ltd 

Data Sheet  

12

 

9.

 

Disclaimers 

EZURIO’S WIRELESS PRODUCTS ARE NOT AUTHORISED FOR USE AS CRITICAL COMPONENTS IN LIFE 

SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE MANAGING 

DIRECTOR OF EZURIO LTD. 

The definitions used herein are: 

a) Life support devices or systems are devices which (1) are intended for surgical implant into the 

body, or (2) support or sustain life and whose failure to perform when properly used in accordance with 

the instructions for use provided in the labelling can reasonably be expected to result in a significant 

injury to the user. 

b) A critical component is any component of a life support device or system whose failure to perform 

can be reasonably expected to cause the failure of the life support device or system, or to affect its 

safety or effectiveness. 

EZURiO does not assume responsibility for use of any of the circuitry described, no circuit patent 

licenses are implied and EZURiO reserves the right at any time to change without notice said circuitry 

and specifications. 

9.1

 

Data Sheet Status 

This data sheet contains preliminary data for use with Engineering Samples.  Supplementary data will 

be published at a later date.  EZURiO Ltd reserve the right to change the specification without prior 

notice in order to improve the design and supply the best possible product. 

The features described within this data sheet are those targeted for the first production 

release of firmware.  Note that not all of these features may be available within individual 

releases of the Engineering Sample firmware.  Check with the firmware release notes to 

determine the supported functionality. 

Please check with EZURiO Ltd for the most recent data before initiating or completing a design. 

 

Summary of Contents for WISMC01BI














Reviews: