31
1206010
Page 3
PATENT NO. : 10,981,588 PATENT PENDING
CUSTOMER SERVICE: [email protected]
Text & Call : 203-901-0055 / Call 203-591-9060
BEFORE BEGINNING, SEE THE ASSEMBLY INSTRUCTION VIDEO ON
EZTRUNK.NET
PATENT NO. : 10,981,588 &
CUSTOMER SERVICE: [email protected]
Text & Call : 203-901-0055 / Call 203-591-9060
4
Clip the wheel plate to the Base Frame Tube, tighten the nuts on the wheels.
Place plastic caps on the wheel nuts.
Place middle door hinge pin bracket on the upright tubes and snug the nuts
so they are adjustable to lock your door in the next steps. The Middle bracket
is a locking mechanism.This protects the doors from falling off when moving
the cart.
Insert the locking pins to secure the base.
Place door hinge pin bracket on the upright tubes and snug the nuts so they
are adjustable to your door in the next steps.
5
6
Roll your windows down before disconnecting the electrical plugs.
Place the rear door from one side of the vehicle on the EZ-Door Holder Cart first. Then
put the same side front door on EZ-Door Holder Cart. SLIDE THE MIDDLE LOCK IN
THE DOWN POSITION when moving the cart to the other side. Take the doors from the
other side off the same way. This distributes the weight on the cart.
1921 0084 & 1900 0084-A814-Ver. C
06/16/22
2
Put the Nylon washers on the
inside of the plates on both
sides as shown
Connect the two plates and tubes together. Tighten the two middle upright
tube screws.The folding outside screws should be snug not tight, so the
bottom folding base swings up easily. The base should not drop down unless
you pull it down.
3
20082
10082
1608010
81409
81408
