Remote control
1. Start / pause» button
A. In standby mode, press this button to have your appliance automatically start its cleaning cycle.
its cleaning cycle.
B. When the appliance is in sleep mode,press this button to exit sleep mode.
C. In operation, press this button to stop the cleaning cycle.
2. Direction buttons
A. Forward ▲
In standby or operation, press this button to move the unit forward.
B. Backward ▼
In standby or operation, press this button to move the unit backward.
C. Left ◀️
In standby or operation, press this button to make the unit turn left.
D. Right ▶
In standby or operation, press this button to make the unit turn left.
Return
Pause
Start
Edge
Powerful
Auto
Return
Pause
Start
Edge
Powerful
Auto
Return
Pause
Start
Edge
Powerful
Auto
Return
Pause
Start
Edge
Powerful
Auto
Return
Pause
Start
Edge
Powerful
Auto
Return
Pause
Start
Edge
Powerful
Auto
NOTE :
- 2 AAA (LR03) 1.5V batteries are required
- If the remote control will not be used for a long time,
remove the batteries.
3. Auto button
Press this button to start the
automatic cleaning cycle.
4. Power Button
Press this button to start
cleaning the desired area.
The suction power is more
intense than in automatic
mode.
5. Edge button
Press this button to start
cleaning along the skirting
boards.
6. Return button
Press this button to instruct
the robot to return to its
charging base.
Starting up the product
1. Place the loading base against the wall
with 1 metre clearance from any
obstacle. Leave 2 metres of space at the front. Then connect the power cable
and make sure the LED light is on.
2. Switch on the appliance by pressing the switch.
The robot emits a sound
and goes into standby mode.
Warning: Before recharging the device, make sure that the switch is set to «I». If
the switch is on «O», the robot will not be able to recharge.
ENGLISH