Gebrauchsanweisung / User Instructions / Notice d‘utilisation
8
4. Transport and Placement
During transportation make sure that the EZetil
®
Party Cooler will be carried in a vertical angle. The
angle inclination must not exceed 45°. Make sure th at the EZetil
®
Party Cooler is not exposed to any
rough impacts.
The EZetil
®
Party Cooler has to be placed on an even surface, in sufficient distance to other
appliances. Make sure that the device has a firm stand. Never place the EZetil
®
Party Cooler near
dangerous or combustible materials, such as gas, gasoline, alcohol or paints. The cooling aggregate
needs to be protected against sand, dust, dirt and moisture. When using the EZetil
®
Party Cooler
outside make sure that it is placed so that it is always protected from rain and moisture.
Do not place the EZetil
®
Party Cooler in direct sun light, this can influence the cooling performance
negatively.
Make sure that the ventilation slots are not covered and that the air can circulate freely. Therefore the
Cooler should never be operated in closed compartment – this can cause an over heat and can
damage the cooling aggregate.
5. Assembling of accessory parts
The EZetil
®
Party Cooler includes 2 trays and 2 bottle holders that can be assembled to the rail.
Please follow the below pictures when assembling the parts.
The trays and bottle holders can hold a maximum weight of 3 kg.
IMPORTANT: During transportation the accessory parts should be dismantled.
6. Hints for use
•
When the cooler is not used for a longer period of time disconnect the device from the
energy supply. Before operating it again check the connecting cord for any defects.
•
Make sure that the wheels are fixed before starting. The device should not be moved
during operation.
•
IMPORTANT: Do not fill any liquids directly into the EZetil Party Cooler. In case of
formation of smoke or raise of temperature disconnect the energy supply immediately
and contact a qualified service engineer (see service address).
GB
