EZee Life EZEE Travel, User Manual

Page: 15 / 22

8. GENERAL MAINTENANCE AND INSPECTIONS
Minimum maintenance should prevent unnecessary repairs.
Keep Your Ezee Travel Shining
Wipe the seat clean with a damp cloth. Protect the painted parts with a coat
of auto wax.
WARNING: Water or excessive moisture around the controller unit or electri-
cal connections may cause contamination of electrical circuitry, damage and
malfunction as well as personal injury. Do not leave your
Ezee Travel in the
rain or in excessively humid locations.
Daily Checks
With the Ezee Travel switched off, check that the hand control lever mecha-
nism returns to the rest position when you push and release it. If there is a
problem do not use the
Ezee Travel and contact your authorized dealer.
Weekly Checks
1. Throttle test: Pull the throttle to the full speed position and switch ON the
Power switch. The Ezee Travel should not move and the LED on the
panel should flash. If the Ezee Travel does move – do not use your Ezee
Travel . Contact your authorized dealer.
2. Automatic brake and drive test: This test should be carried out on a level
surface with at least 3’ / 1 m. clear space around the Ezee Travel :
 Switch the Ezee Travel on.
 Move the control lever only slightly in the forward direction until you hear
a “click” when the brake disengages. The Ezee Travel should start to
move forwards slowly.
 Immediately release the throttle. You must be able to hear a “click” when
the brake engages back, within a few seconds.
 Repeat the test in the reverse direction.
If you do not hear the brake operating, or the Ezee Travel Lite does not
move slowly in the expected direction – do not use your EzeeTravel Lite .
Contact your authorized dealer.