Assembly Instructions
Unfolding Rear Frame
Pull on the folded frame lock pin ring (Fig. 4/1) to
release the foot platform and unfold the frame.
Pull the seat backrest (Fig. 4/2) and lift it to the
upright position. Ensure that the unfolded frame
lock pin secures the platform in the horizontal
position.
Unfolding Front Column
Pull the column lock trigger (Fig. 4/3) upward
towards the handle to release the tilt lock.
Move the drive unit away from the column (all
the way) to open the quick-release housing. This
is the column “detach” position.
Connecting the Front Column to the Rear
Frame
Position the column in the “detach” position. Lift
the front of the foot platform and insert
connection pin into the quick-release housing on
the drive unit.
This may be done without bending down by
lifting the front of the seat “lip” while holding the
front column handgrip as shown in Fig. 5.
Front Column Adjustment (Figure 6)
To adjust the angle of the front column, pull the column lock trigger upward.
Move the column into the desired position and release. Push lightly back and
forth on the column to ensure that it is locked in the desired position.
1. For driving the EZee Classic adjust column to the rear-most position.
2. For getting in and out of the EZee Classic seat comfortably, the column may
be moved away from the seat to the entry/exit position.
3. For detaching the front column from the rear frame, adjust the column fully
forward to the detach position (Fig. 6/3); remove battery before adjusting the
column to the detach position.
6