Weekly Checks
(continued)
2) Automatic brake and drive test:
This test should be carried out on
a level surface with at least 3’ / 1 m. clear space around the EZee
Classic
a) Switch the EZee Classic on.
b) Move the control lever only slightly in the forward direction until you
hear a “click” when the brake disengages. The EZee Classic should
start to move forward slowly.
c) Immediately release the throttle. You must be able to hear a “click”
when the brake engages back, within a few seconds.
d) Repeat the test in the reverse direction. If you do not hear the brake
operating, or the EZee Classic does not move slowly in the expected
direction – do not use your EZee Classic. Contact your authorized
dealer.
Monthly Care
Clean upholstery, plastic and metal parts with a mild surface cleaner.
CAUTION:
Keep cleaning solvents away from electrical wires and
connectors.
Six Month Maintenance
1) Apply a lubricant/cleaner (such as WD40 or similar) these locations:
a) Column tilt lock pin and housing.
b) Unfolded lock pin and housing.
c) Battery pack lock pins.
2) Lightly apply Vaseline or similar lubricant to battery contact pins
and springs on front column.
3) Check for tire wear.
16