Always ensure the battery is fully charged before use. The regular charging
time is about 7 hours. But if the power is fully run down it may take 10-12 hours
to charge fully until the red LED on the charger turns green.
When not using the chair for a long duration, charge the battery full every 2
months. If the battery is left uncharged for a long period of time, it will damage
the battery permanently.
Mounting/Removing Battery
Ensure the chair is powered off before mounting or removing the battery.
Removing the battery:
1. The batteries are located in the wheelchair side frames.
2. Press the lock button (Fig. F) and slide out of the battery tube from the front
of chair (Fig. G)
To install the battery, simply slide the battery into the battery tube.
Charging the Battery
The battery can be charged with normal AC
power (AC 110-220 V, 50-60 Hz). The charging
port is located under the front part of the joystick.
Before charging, ensure the chair is powered off.
1. Plug the charger 3-pin cable into the charging
port under the front part of the control panel
(Fig. G2)
2 . Plug the power cord of charger into a power
outlet.When the red LED is on, it is charging.
19
F
G