5
NOTICE
The wall mount fasteners included with this fireplace are for use ONLY with a
wood-framed wall covered in drywall (sheet rock). For concrete walls, cinder
blocks, or other wall types, consult a professional for the best attachment methods.
ALWAYS unplug
this fireplace heater
before assembly
or
cleaning, or before
relocating.
Failure to do so could result in
electric shock
,
fire
, or
personal injury
.
AVOID INJURY and DAMAGE! Three screws should
be screwed
directly into wall
studs
and additional screws must also be
screwed into the drywallanchors
.
Due
to
the
many
different
materials
used
on
different
walls,
it
is
highly
recommended
that
you
consult
a trained tradesman
before
you
install
this
appliance
on
the
wall.
That the supplied plastic anchors are used to affix the bracket to the wall and the
bracket is adequatelysecured.
E. With the wall mounting bracket installed have two people lift the appliance up and
insert the two hooks on the bracket into the two slots on the back of the appliance.
F.
Check the appliance for stability ensuring that the bracket will not pull free from the
wall.
NOTE:
MZEZAWHBL72 will be equipped with two
wall brackets which fix on
to
the back of fireplace box
A.
Select
a
location
that
is
not
prone
to
moisture
and
is
located
at
least
36"
(914mm)
away
from
combustible
materials
such
as
curtain
drapes,
furniture,
bedding,
paper,
etc.
B.
Have
two
people
hold
the
appliance
against
the
wall
to
determine
the
final
location.
C.
Place
unit
face
down
on
a
soft,
non
abrasive
surface.
Remove
the
bracket
from
the
back
of
the
unit
by
removing
the
screws,
refer
to
Figure
1.
D.
Mark
out
location,
then
mount
the
bracket(s)
onto
the
wall
using
the
supplied
screws.
This
bracket
MUST
have
the
hooks
facing
upward
and
be
level.
NOTE: It is strongly recommended that the mounting bracket be Screwed into
the wall studs where possible. If the wall Studs cannot be used, ensure