ezdupe USATA1000 User Manual Download Page 27

Page: 27 / 27

The duplicator may be busy. Buttons pressed while the duplicator is

processing will not perform functions unless otherwise specified.

Possible faulty button. Contact our technical support department for

further information.

One of the drives does not open and/or LED does not light up

Check USB port switch (if there is one on the back of the duplicator) and

make sure the switch is in the OFFposition before machine power is turned

on.

If a disc is stuck inside a drive, insert a paper clip or safety pin in the

pinhole underneath the drive door and push gently. Make sure the power is

OFF during this step. Then press the EJECT button of the drive a few times

to test the disc tray.

: The blank CD/DVD/Blu-ray is not recognized in the writer drive(s)

Test the blank disc in another writer drive. A faulty writer drive will not

recognize blank discs.

Change the blank disc to another disc. A defective blank disc will not be

recognized by the writer drive.

Summary of Contents for USATA1000




























Search results

Summary of Contents for USATA1000

Reviews:

Related manuals for USATA1000

Brands by name

Popular brands

ezdupe USATA1000, User Manual

Search results

Summary of Contents for USATA1000

Reviews:

Related manuals for USATA1000

Brands by name

Popular brands