2. Display mode: Swtich ECO/ Standard/ Bright mode.
3. Portrait mode: Switch on to project vertically.
Pleasemake sure NOT to block the ventilation.
4. V.Keystone: Manually vertical keystone
adjustment up to ±30 degrees.
5. H. Keystone: Manually adjust horizontal
keystone up to ±14 degrees.
6. 4 Corner Correction: Choose the corner to be
adjusted and use arrows to change the location.
7. Color Setting: Change brightness, Contrast,
Saturation, Sharpness, R/G/B Gain, and
R/G/B Offset.
8. Firmware Upgrade: Upgrade via USB drive or through
internet.
9. Projector Location: Switch to Front/ Front Ceiling/ Rear/ Rear
Ceiling.
10. Language: Change language with arrows.
11. Reset All: Choose yes to reset projector to factory default.
All saved changes to Setting are lost. The projector will be
restored to the factory settings, and the data adjusted by the
user will not be saved.
Settings
(V. Keystone)
(H. Keystone)
(4 Corner Correction)
Select the "Setting" key on the projector or remote control, and
press "OK" to confirm.
1. Wi-Fi setting : Select the "Wi-Fi setting" menu and enter the
Wi-Fi setting interface, select the "Internet", press "OK" key to
confirm, and select the router from AP list and enter the
password.
