Wireless
Adapter
HDMI
DC
Preparation
How to set up EZCast Beam projector
1. Insert the wireless adapter into the wireless kit port of the
projector.
2. Plug the power to the projector, and the power button will
light up.
3. To turn on projector, hold the power button of the projector
for 3 seconds till the light turn green.
4. Adjust focus ring until the projection image is clear and
focused.
About portrait mode
The projector supports full-screen vertical videos
automatically when both the mobile and the projector are
displayed by portrait mode.
(1) Enter “Settings” and find “Image” settings.
(2) Switch “Portrait mode” option to “Auto”.
(3) Go “Keystone calibration” if needed.
(Landscape mode)
(Portrait mode)
