EZAutomation EZ Touch EZ7 Series, Quick Start Manual

Page: 26 / 32

25 / 31
6.5 S
ETTING
D
ATE
/T
IME
The EZ7 Series HMI maintains a Real Time Clock (RTC) which can be adjusted from the EZ7 Series HMI
unit itself. Touch upper left corner of the panel for more than 6 sec. After selecting the appropriate
language for the unit, the screen below will appear displaying the current firmware, the available
memory as well as the time and date set on the unit.
To change the Time/Date :
1) Press the Clock button.
2) A new screen loads which displays a numeric keypad. Enter the hour first, then select Hr to
change the hour. Do the same to enter the minutes. Time is displayed in a 24 hour format.
NOTE: If at any time during this process, an incorrect number is pressed, you may use
the CL button to clear the entry.
a. For example, to enter a time of 8:34 am you would press 8 then the Hr button.
b. Press 3 then 4 followed by the Min button. (Seconds can be inputted as well.)