3
The microprocessor
advanced intelligence system
analyzes and automatically adjusts the parameters
of the internal systems according to ambient air temperature, water pressure, gas flow, and
incoming water temperature. By using a high-precision and reliable water flow sensor, the user-
selected pre-set gives consistent water temperature for worry-free operation.
The gas control valve is controlled by a micro-processor which instantly calculates and controls the
gas supply which saves on consumption and works in unison with the speed of the fan motor for
proper combustion mixture and maximum efficiency. With this forced-air system the effects and
efficiencies of the heat exchanger is much greater than the models that are non-fan forced.
This model features a low water pressure start-up for use in areas where there is lower pressure.
Memory system restarts the heater in the previously selected settings.
Multi-function self diagnosis featuring flame-out protection, exhaust pressure self diagnosis,
overheating protection, combustion mixture, and anti-freeze protection.
INSTALLATION REQUIREMENTS
Before installation, contact your local gas company and/or a qualified installer for a proper
installation. Installation by unqualified personnel is forbidden by most local codes and is dangerous.
*We hold no liability expressed or implied for damages of any kind, injury, or death caused directly or
indirectly by errors in installation, improper or unsafe use, or installations done by those persons not
qualified to do so.
•
Mount the heater in a location that is outdoors in a well ventilated area such as an open
yard.
•
To avoid exhaust gasses from entering into the dwelling, the heater must be located a safe
distance from any window or door opening. (Minimum of five feet in every direction.)
•
This water heater CANNOT BE INSTALLED INDOORS for any reason.
•
Always select a mounting area that is well clear of humans or animals to protect life and
health. Keep in mind that even though this device is very quiet, it should be considered that
any sound it produces will not disturb others.
•
No flammables or other devices should be near this heater. DO NOT ATTEMPT to install a
vent hood or exhaust fan above this heater. IT IS NOT FOR INDOOR USE! Do not modify this
heater in any way!
•
Always plug into only a three prong outlet that is properly wired and grounded. NEVER USE
an extension cord to connect the power supply. Ground-fault interrupted waterproof
exterior types are best.
•
Do not tilt the heater in any way. It must be installed upright at all times.
•
The heater must be securely mounted with screws.
•
Gas connections must be up to local code as per type of gas and applications.
