Trouble Shooti
n
g
EZ Ligh
tin
g LLC
1385 H
w
y 35, Suite 116, Middleto
w
n,
N
J
0
7748
Tel:
1-
800
-585-723
9
Website:www.ez-
lighting.com
Mail:
Provided by
www
.ez-ligh
ti
ng.com
SPECI
F
ICATIONS
EZ Lighting proudly presents our LED Security fixture utilizing the lastest in LED technology for
maximum light output in a low-profile, compact housing. These fixtures come with a
sophistcated motion sensor for increased safety, security and peace of mind. It produces a
light output of up to 400lm. The security light with motion sensor is the perfect system for
your home and business. It is controlled by a sensor, which measures ambient luminance and
movement. The average detection distance of up to 39 feet (12 meters), with a 180°
detection range.
LED Security Lighting Fixture
This device complies with part 15 of the FCC Rules.Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
EZ
C
ode
T
ype
Wa
tt
age Voltage Kelvin
C
RI
IP Ra
ti
ng Lumens
EZSH
0
1
0
65
0
BL
00
Solar
6
Solar po
w
er
5000 Cool
8
0
+
IP 44
4
00
2
1.Make sure wire is seated properly in bottom
of lighting fixture
1.Faulty connection between
lighting fixture and solar panel.
2.Verify that solar panel is in location with
prevalent sunlight
2.Insufficent stored energy to power
lighting fixture
3.Battery is no longer able to
store energy
4.Replace battery
Light will not turn
on.
3.Wait for solar panel to properly charge
battery
Corrective Action
1.When the arrow on the “TEST / OFF / AUTO“ adjustment screw is at the “Test“ setting, the
dimming function is deactivated. If any movements are detected, the connected load is
switched on for “5“ seconds. The “Time“ function is deactivated under this setting.
2.The switch position "AUTO" activates the movement sensor function. The switch position
"OFF" switches the LED light.
3 . In order to ensure a sufficient battery charge, the solar collector surface must be subjected
to prevailing sunlight during daytime.
4.Switch position "Off" = LED Light will not activate, rechargeable batteries will be charged
during daylight.
5. Switch position "Auto" = Rechargeable battery operation - LED light will activate in the dark,
rechargeable batteries will be charged during daylight.
6. The operation cycle with fully charged accumulators is “2” hours.
7. The sensor’s scope of detection is between “10ft“ and “40ft“ (adjustable). The installation
height should preferably be adjustable between “6ft“ and “8.3ft“ . The angle of
detection is “150 °“.
8. When movement is detected, the operating period of the connected load is between “5“
seconds and “3“ minutes (adjustable). When new movements are detected during this original
operating period, the duration is always lengthened by the amount of time set by the user.
Motion sensor functions:
Please scan below QR code for installation video.
