Optimization
: Duplicator will automatically generate an optimized place and
burn the break point.
Press ▲▼ to
select setting
11.11.11 Show Result Time
Allows to show the total result time on display.
Press ▲▼ to
select setting
11.11.12 Performance
Allows to set burning priorities based on performance required.
Speed
: duplicator will use maximum data transfer rate for burning.
Compatibility:
will maximize compatibility range but less transfer rate.
Balance
: duplicator will maintain compatibility while keep its burning speed as
fast as possible.
Press ▲▼ to
select mode
11.11.13 Set Time Zone
Allows to setup a time zone for the specific region based on GMT and time
stamp your copies. Setting range is from GMT +13 to GMT -12.
Press ▲▼ to
set time zone
11.11.14 Show Image Name
Allows to show image file name on display when the source drive is HDD.
ENT
ENT
[ Setup ]
11. Advance Setup
[ Advance Setup ]
10. L0 Break Point
[ L0 Break Point ]
By Source
ENT
ENT
[ Setup ]
11. Advance Setup
[ Advance Setup ]
11. Show Result Time
[ Show Result Time ]
Disable
ENT
ENT
[ Setup ]
11. Advance Setup
[ Advance Setup ]
12. Performance
[ Performance ]
Speed
ENT
ENT
[ Setup ]
11. Advance Setup
[ Advance Setup ]
13. Set Time Zone
[ Set Time Zone ]
GMT -8
ENT
ENT
[ Setup ]
11. Advance Setup
[ Advance Setup ]
14. Show Image Name
[ Show Image Name ]
Disable
Press ▲▼ to
select option
20
