10.9 Copy Counter
It keeps track of the numbers of successful and failed copies made by the
duplicator for CDs and DVDs. There are three options: Show Count (to display
current copy counter), Enable Counter (to turn the counter on or off) and Clear
Counter (to clear counter).
10.9.1
Show Count
This command can display the numbers of successful and failed copies made
by the duplicator for CDs and DVDs. The counters will be reset automatically
when the duplicator is turned off.
10.9.2
Enable Counter
This command allows to choose if the counter is enabled or disabled.
Press
▲▼
to select the setting
10.9.3
Clear Counter
This command can clear counter.
11. Setup
11.1 Start-up Menu
It sets the command to be displayed first when the duplicator is powered up
and initialized. All primary commands are available to be set up as Start-up:
Copy
,
Test
,
Copy + Verify
,
Copy + Compare
,
Verify
,
Compare
.
Press ▲▼ to
select function
ENT
ENT
11. Setup
[ Setup ]
1. Start-up Menu
[ Start-up Menu ]
Copy
ENT
ENT
[ Utility ]
9. Copy Counter
[ Copy Counter ]
1. Show Count
Pass: 0
Fail: 0
ENT
ENT
[ Utility ]
9. Copy Counter
[ Copy Counter ]
2. Enable Counter
[Enable Counter ]
Enable
ENT
ENT
[ Utility ]
9. Copy Counter
[ Copy Counter ]
3. Clear Counter
Erasing Count
Complete!
14
