manualshive.com logo in svg

EZ Digital DS-1000 Series, Operation Manual

Share
Download
EZ Digital DS-1000 Series Operation Manual Download Page 35

Off       

  

   

  

:

 This cancels the arithmatic function.

Ch1 + Ch2 :

 This displays a waveform which adds signals of two channels.

Ch1 - Ch2

  

:

 This displays a waveform which subtracts Ch2 from Ch1.

Ch2 - Ch1

  

:

 This displays a waveform which subtracts Ch1 from Ch2.

Ch1 Invert

 

:

 This displays an inversed waveform signal of Ch1.

Ch2 Invert

 

:

 This displays an inversed waveform signal of Ch2.

Displaying a math waveform automatically removes the display of channels 

used to create the math waveform. Math operations are turned off if a channel 

used in the operation is turned on.

Addition, subtraction and 

inversion arithmetic of the 

two channels are able to 

be carried out to Ch1 or 

Ch2 by Arithmatic. 

1) Arithmatic

  (Off/Ch1+Ch2/Ch1-Ch2/Ch2-Ch1/Ch1 Invert/Ch2 Invert)

2) Advenced Functuons(Off/Pass-Fail/FFT)

34

Summary of Contents for DS-1000 Series




































































Reviews:

No comments

Brands by name

Popular brands

Load more brands