5
6.4 SLIDESHOW SETUP
SLIDESHOW MODE
：
：
：
：
Set the slideshow to start
automatically.
FOLDER REPEAT
：
：
：
：
Set all files (picture, music or movie) in
the folder to show only once or continuously (loop).
INTERVAL TIME
：
：
：
：
Set the time each photo is shown to 1, 3,
5, 10, 30 or 60 seconds.
TRANSITION (EFFECT)
：
：
：
：
Set the transition effect and auto slide with sequential or random
playback.
TIME MESSAGE (only for P050-2)
：
：
：
：
Set the time message is shown on the screen.
AUTO START
：
：
：
：
Enable/ disable auto playing media files on the memory card when the device
is turned on.
6.5 PREFERENCE
TV TYPE: Choose the TV TYPE.
• MULTI . SYSTEM
：
：
：
：
Set the TV type automatically
.
• NTSC: Set the TV type to NTSC.
• PAL: Set the TV type to PAL.
OSD LANG: Select the OSD language (ENGLISH, FRENCH, GERMAN, ITALIAN,
JAPANESE, PORTUGUESE, SPANISH and NEDERLANDS).
OSD MESSAGE: Turn the OSD message function on/ off.
RESET: Reset all settings to the original (factory) settings.
FIRMWARE : New F/W can upgraded from the memory card.
• EDITION : Show the F/W versions.
• UPDATE : Used to update the F/W.
6
6.6 TIMER FUNCTION (only for P050-2)
NOTE
：
：
：
：
Make sure the insulating slice has already been taken out.
Press the “EDIT” button on remote control to open the timer setup window.
Use the Left and Right buttons on the remote control to select each item.
Use the Up and Down buttons on the remote control to change the value.
Press EDIT button on remote control to save and quit the timer setup screen.
Timer Setup Window
Time : The current time(format: hour : minute : second)
- Power On Time: Set the time of auto power on.
- Power Off Time: Set the time of auto power off.
