29
Application 1:
The Eyezone PIR is an external remote control receiver.
Application 2:
The Eyezone PIR is a motion detector.
12.1 MOTION DETECTION FUNCTION
Step 1
：
Insert the CF card to the Eyezone OP191080P, and the Eyezone OP191080P will play the
default file automatically while powered on.
Step 2
：
After sensing approaching subjects, the Eyezone OP191080P will play the first demo file.
Step 3
：
The Eyezone OP191080P supports two options (Repeat Default / Repeat All) when the demo
file finishes playing. The functions can be set in the setup menu. (Other Setup
→
Play Button)
- Repeat Default
：
The
Eyezone OP191080P will automatically play the default file when the
demo file finishes playing.
- Repeat All
：
The Eyezone OP191080P will automatically play all the demo files when the demo
file finishes playing.
NOTE: The sensing distance is up to 3 meters with an angle of 45
°.
12. USING THE PIR SENSOR (optional)
30
Situation Check
Point
No Picture
1.
Check power cable and power switches.
2.
Ensure the video cables are connected between the player and
the Eyezone OP191080P.
3.
Press the “TV MODE” button on the remote control to select the
VGA output mode.
4.
Make sure the file format on the CF card is correct.
5.
Check if the display device is switched to correct video input
source.
No Response From
the Remote Control
1.
Ensure that there are 2 batteries (AAA size) in the remote
control and they are inserted the correctly.
2.
Check for any barrier between the remote control and the
product.
No sound
1.
Check if the mute function is on.
2.
Check if the volume is set properly.
3.
Check if audio cable has been connected correctly.
Network Not Working
1.
Check your IP settings on the Network Setup page. (refer
to 9.1)
2.
If using wired network, make sure the network cable is
plugged in on both the Eyezone OP191080P and your
network hub.
13. TROUBLESHOOTING
