EYE-LCD4600M/W-SN
41
4.2 Firmware Update Scaler
)
Power Off the display
)
Connect the flasher cable (shown in picture) to the PC.
)
Connect the flasher cable to port “AUX1” on the the display
)
SET dipswitch No. 6 to On
)
Start the “Flash Upgrader Software”
3
Choose Connection “Serial”
3
Choose Baud Rate “115000”
3
Select the appropriate COM-Port where the flasher cable is connected to
3
Press the “Flash”- Button
)
Power On the Display to start the flash upgrade
)
When the update is finished, reset DIP Switch No. 6 to off and restart the display
