EYE-LCD4600M/W-SN
31
Caution: When the display is in Power Up – or Power Down Sequence it is not possible to communicate with the
software.
The button “Read default” reads the default values of the display. So it is always possible to return to the
adjustments of the manufacturer, if the values have been misadjusted too much. The current data of the display
is saved with the button “Write”. With “Load” they can be called up again.
3.3.3 Communication Settings
Set the COM-Port to which the display wall is connected in the entry field “Serial Port”.
If a LAN board is installed use the settings provided in the On-Screen-Menu-Section „Network configuration“ to
connect the display over an IP network.
)
Colour analyser option
Communication Port determines the serial port to which the analyser is connected to. The other adjustment
options depend on the used colour analyser. Here the operating instructions of the devices have to be observed.
)
Pattern generator
So that gcceyeCube is able to create a connection to gccPattern the IP address or the name of the computer
must be fed into the network here. If the network has no DNS service the IP address has to be fed here.
