Eyevis EYE-LCD-5500-XSN-LD-F, User Manual, Page: 79 / 86

RS232 command list
Function Command
Possible
Values
Default
Values
Comment
Po
w
er
Switch the LCD On or Off Power 0=Off, 1=On 1
Sending to an individual ID will
enable Sleep mode.
SET(0;Power;0) will set the entire
wall to deep sleep mode. Cf.
remarks in the broadcast section
above
Enable Sleep Mode Sleep 1=On,0=Off 0
Enable Standby-Mode that still
allows communication with
individual devices
Input
Input Source
Input
0=DP
1=HDMI
2=DVI
3=VGA
4=CVBS
5=YC
6=SLOT-IN
0
Automatic Input Scanning Source Scan
0=Off
1=On
0
Pic
tur
e
Contrast Contrast 0-100 50
Brightness Brightness 0-100 50
Sharpness Sharpness 0-24 12
Backlight Backlight 0-100 100
ALC (=Ambient Light
Control) Automatically
control backlight
brightness
ALC 0= Off, 1= On 0
ALC Value ALC Value 0-100
Local Dimming Local Dimming 0= Off, 1= On
Color M
anagemen
t
Color Balance Color Balance
0=Warm
1=Normal
2=Cold
3=User
1
Color Saturation Color Saturation 0-100 50
User Red Gain User Red Gain 0-100 100 Set individually for each device
User Green Gain User Green Gain 0-100 100 Set individually for each device
User Blue Gain User Blue Gain 0-100 100 Set individually for each device
User Red Offset User Red Offset -50-50 0 Set individually for each device
User Green Offset User Green Offset -50-50 0 Set individually for each device
User Blue Offset User Blue Offset -50-50 0 Set individually for each device
ID S
ettings
Automatically assign
Display IDs trough all
connected Devices
Auto Display ID Trigger by sending value1
Force a new ID on the
Device
Force Display ID Give new ID as argument
Reset assigned display
ID to 1
Reset Display ID Trigger by sending value 1
EYE-LCD-5500-XSN-LD-FX 79
Version 1.0 | May 2015