Fine adjustment for selected cubes
Fine differences in colour rendering and brightness between the cubes
can be adjusted with the fine adjustment function.
To open the fine adjustment function:
1.
Click on the
fine adjust...
button.
ª
The
color fine adjust
window opens.
2.
Select a cube and adjust the RGB values until a harmonious colour
rendering is achieved for the entire wall.
ª
As soon as you change the RGB values, the
reset
button appears
underneath the RGB boxes. Click on
reset
to reset the changes.
3.
Click on
Apply actual wall status
.
ª
It takes a few seconds to apply the changes.
4.
Close the window if you are satisfied with the result.
ª
The start window opens again.
5.
Click on
save All
to save the settings in all cubes.
You have now completed the colour settings.
1.
Select the cube you want from the list in the left-hand field.
2.
Click on the
button to apply the changes for the selected cube
only.
You have the following input options:
•
Drag the whitepoint across the colour field
•
Direct input of RGB values
•
Direct input of CIE values
EC CUBE with LED Projection Engine
35
coMMissioning (configurAtion)
