Quick Operation Guide of Network Video Recorder
2)
You can edit the IP address, protocol, management port, and other information of the IP camera to be
added.
3)
Click
Add
to add the camera.
4)
(For the encoders with multiple channels only) check the checkbox of Channel No. in the pop-up window,
as shown in the following figure, and click
OK
to finish adding.
One-touch RAID Configuration
Purpose:
For the HNRT00 series NVR, the disk array must be configured if you want to save recording and log files locally.
Through one-touch configuration, you can quickly create the disk array. By default, the array type to be created is
RAID 5.
Before you start:
As the default array type is RAID 5, at least 3 HDDs must be installed in you device.
Steps:
1.
(For HNRT00 series only) Enable the RAID function by checking the checkbox in the disk mode
configuration interface.
Menu > HDD > Advanced
2.
Enter the Physical Disk Settings interface.
Menu > HDD > RAID
26
