- 12 -
2
．
Setting the power outage recovery function
You can set whether temperature control will be resumed when power is turned on again after power outage during
temperature control by setting ON/OFF of the power outage recovery function.
Set
Run
Stop
▼
▲
℃
Run
Heating
Set
Run
Stop
▼
▲
℃
Run
Heating
Flash
Set
Run
Stop
▼
▲
℃
Run
Heating
Flash
Change settings
Set
Run
Stop
▼
▲
℃
Run
Heating
(1) Pressing the SET key in the alarm function setting mode ([A-4]
indication on) will indicate the current state of the power outage
recovery function.
[ on]…Power outage recovery function ON
：
Temperature control starts at the set temperature on recovery from
power outage.
[oFF]… Power outage recovery function OFF
：
Temperature control will not start even on recovery from power
outage.
※
The setting is [ on] at the factory shipping.
(2) Use the UP key and the DOWN key to set ON/OFF for the power
outage recovery function.
(3) Pressing the SET key switches to the alarm function setting mode
and the setting of the power outage recovery function is completed.
([A-4] indication on)
(4) Press the SET key long for about 5 seconds to return to the
measurement mode.
・
When the power outage recovery function is ON…Temperature control resumes after power recovery in the
state immediately before the recovery.
・
When the power outage recovery function is OFF…After power recovery, temperature control stops irrespective
of the state immediately before power outage.
※
When power outage occurred during temperature control, [A-4] and the measured temperature will
appear alternately after recover irrespective of the setting for the power outage recovery function.
Press the SET key to clear the indication.
