www.eyc-tech.com
4
Clamp-on Ultrasonic Flow
Flow
Powering on
As soon as the flow transmitter is switched on, the self-diagnosis program
will start to run.
Signal Quality (SQ value)
Q value is short for Signal Quality. It indicates the level of the signal detected. Q value is
indicated by numbers from 0 ... 99 represent the minimum signal detected while 99
represent the maximum.
Normally, the transducer position should be adjusted repeatedly and coupling compound
should be checked frequently until the signal quality detected is as strong as possible.
Keypad Functions
Follow these guidelines when using the flow transmitter keypad：
Setting or display mode, when it is setting mode, that can return to the previous menu,
and
scroll up and down to select the menu, when press
move to next digit, press
and the numbers scroll from 0 ... 9, you can select the number. Press
to confirm.
Window descriptions
Display Menu
■
When the power on, the transmitter will display Velocity / Net
Totalize. Display data and time, velocity and net totalize.
■
Press
will display Flow Rate / Net Totalize.
Press
will return to previous menu. Display signal quality. Time,
flow rate and velocity.
■
Press
will display Flow Rate / Velocity / Net Totalize.
Press
will return to previous menu. Display signal quality. Time,
velocity, flow rate and net totalize.
■
Press
will display Run-time / Daily Totalize / Month Totalize / Year
Totalize. Press
will return to previous menu. Display Run-time, Data,
Month and Year net totalize.
Setup Menu
Press
will display Setup menu.
The following options are available ( by
or
buttons)
0.
Pipe parameter
1.
System setting
2.
Calibration
3.
Output setting