Lighting & Signalling modules
17
Site: exxotest.com
The lighting controller has four positions:
1
st
position: OFF
2
nd
position: side lights ON
3
rd
position: dipped beams ON
4
th
position: main beams ON
ID
Description
Functionalities
1
Permanent power supply
2
Output - Main beams
Two different controls - main beam flasher control and
lighting controller in position 4
3
Output - Main beams
Selector in Position 3
4
Output - Fog lamps
Selector in Position 2
5
Output - sidelights
Selector in Position 1
8
Horn control input or output
Actuates horn control
9
Horn control input or output
Actuates horn control
11
Common
12
Indicator - LHS
Indicator switch - left
13
Indicator - RHS
Indicator switch - right
Module DTM7007
This module represents the hazard warning selector
ID
Description
Functionalities
1
Power supply output for flasher unit
(module DTM7008)
Constant APC at rest and battery positive
when active.
2
Power APC
+ APC
3
Battery supply (+30)
Permanent positive
4
Earth connection
Earth
7
Supply for Terminal C on Module 7008
(flasher unit)
Control signal from flasher unit module (DTM7008)
8
9
To right & left hand side indicators
Hazard warning button pressed
Internal hazard warning repeater light
Flashes when the hazard warning switch is pressed.
Power supply
battery
Power
APC
Power output to
flasher unit
Supplied by Terminal C on
Module 7008 (flasher unit)
Internal hazard
warning repeater
Earth
Position A - Off when driving
Position B - Hazard warning ON
To right & left hand
side indicators