Exuav FlyTower F4, Instructions Manual

Page: 1 / 17

www.exuavrc.com
FlyTower F4 Instructions
V1.0

Warning
Instructionsforuse
1, Please install ANT (must be DONE) before debugging or testing VTX（and OSD）, or lead to VTX not
working properly.
2, Please use proper tools to install FlyTower .It is easy to damage the PCB components by using sharp
tools. (warning: Bear in mind that screws do not install too tight between every layer, so as not to
destroy the PCB and electronic components).
3,When debugging and testing flight control Please remove all the propeller; Try not to test indoors, So
as not to cause safety accidents. Install the propeller before a test flight, please check again.
4,Please check and adjust ESC plate welding, thus brings all the losses and problems, or you