extronics iCAM501, Operating Manual

Page: 16 / 40

Operating Manual
16
2.8 Camera Setup and Taking Pictures
There are a few different options available when taking a picture:
•
A picture can be taken with no flash and no audio recording
•
A picture can be taken with a flash to allow a good picture to be taken in low
light conditions.
•
A picture can be taken and an audio recording taken after the picture has
been taken to provide an audio record for the picture.
•
Or a picture can be taken with a flash and also create an audio recording.
Once a picture has been taken the LEDs and the buzzer are used to indicate if a
good picture has been taken or not.
2.8.1 Enabling the Flash
Press the “FLASH”
button to enable the flash
feature of the camera.
Once the flash button is
pressed the red LED will start
to flash, after some seconds
the LED will become solid
indicating the flash has
charged and is ready for use.