XTP T HWP 101 4K Wallplate Transmitter • Installation
4
Installation
This section contains the installation procedures and details for the XTP T HWP 101 4K.
Topics in this section include the following:
•
•
Metal Junction Box or Mud Ring Installation
•
•
•
•
Installation Overview
The XTP T HWP 101 4K can be installed into the provided mud ring or a UL Listed metal
electrical junction box.
NOTE:
If a junction box is required, it must be metal.
1.
Prepare the mounting surface.
CAUTION:
Risk of personal injury
. Failure to check the items listed below may
result in personal injury.
ATTENTION :
Risque de blessure
. La non-vérification des éléments listés
ci-dessous peut provoquer des blessures.
ATTENTION:
•
Failure to check the items listed below may result in property damage.
•
La non-vérification des éléments listés ci-dessous peut provoquer des
dommages matériels.
•
Ensure there are no utility cables or pipes at the intended location that might be
damaged or cause injury when installing the device.
•
Check that the installation meets building, electrical, and safety codes.
•
Ensure there is sufficient space behind the device.
•
Choose a location that will allow cable runs without interference.
NOTES:
•
Cables may need to be installed in the wall or conduits before installation.
•
The mud ring does not require attachment to wall studs.
•
For metal junction boxes, refer to the manufacturer for more installation
requirements.
2.
Cut a hole in the mounting surface (see
on the next
page).
Summary of Contents for XTP T HWP 101 4K
Page 6: ......
Page 8: ...XTP T HWP 101 4K Wallplate Transmitter Contents viii ...