Extron electronics XMP 240 C AT User Manual Download Page 16

Page: 16 / 139

XMP 240 C AT • DSP Configurator Software

DSP Configurator
Software

The XMP 240 C AT has no front panel hardware controls. To configure and operate the XMP,
use a PC running Microsoft

Windows

7 or newer and Extron DSP Configurator software.

This section describes Extron DSP Configurator software and covers the following topics:

•

Downloading and Installing DSP Configurator

•

Mix-Points

•

Accessing the DSP Configurator Help File

•

DSP Configurator Outputs

•

DSP Configurator Main Workspace

•

Outputs

•

Menu Bar

•

Output Processing

•

DSP Configurator Inputs

•

Expansion Outputs

•

Input Processing

•

Expansion Output Processing

•

Virtual Returns

•

Virtual Send Bus

•

Virtual Return Processing

Downloading and Installing DSP Configurator

From

www.extron.com

, hover over the

Download

tab at the top of the page.

From the

Featured Software

list, select

DSP Configurator Software

From the

DSP Configurator Software

product page, click the blue

Download

button.

Select

Run

to run the DSP Configurator installer. Select

Save

to save the install file to run

at a later time.

To run DSP Configurator from the default install location, click

Start> Programs> Extron Electronics> DSP Configurator> DSP Configurator

From the DSP Configurator splash screen drop-down menu (figure 10,

), select the

model of XMP 240 C AT being connected to the host PC and click

(

Figure 6.

DSP Configurator Splash Screen

Summary of Contents for XMP 240 C AT












































































































































Search results

Summary of Contents for XMP 240 C AT

Reviews:

Extron electronics XMP 240 C AT, User Manual, Page: 16 / 139

Search results

Summary of Contents for XMP 240 C AT

Reviews: