XMP 240 C AT • DSP Configurator Software
50
Mix-Point Context Menu
Right-click a mix-point to open the mix-point context menu. This menu provides quick
options to operate mix-points.
Figure 75.
Mix-Point Context Menu
1
Mute
— Mutes the mix-point.
2
Unmute
— Unmutes the mix-point and creates an audio path between an input and
output.
3
Bypass Automixer
— Bypasses automixer processing at the mix-point and marks the
mix-dot blue to signify automixing is bypassed.
4
Include Automixer
— Includes automixer processing at the mix-point and marks the
mix-dot orange to signify automixing is included.
5
Bypass Processors (*Except filter block)
— Bypasses signal processing, except
for filters, at the mix-point and marks the mix-dot green to signify signal processing is
bypassed.
6
Cut
— Cuts the mix-point parameter configuration, preparing it to be pasted to another
mix-point. The parameter configuration information is not removed until it is pasted to
another mix-point.
7
Copy
— Copies the mix-point parameter configuration, leaving the mix-point intact and
preparing it to be pasted to another mix-point.
8
Paste
— Pastes a previously cut or copied mix-point parameter configuration to the
selected mix-point.
9
Delete
— Deletes the mix-point parameter configuration and mutes the mix-point.
¢
Mark Row
— Marks the entire row containing the selected mix-point, highlighting all of
the elements.
£
Unmark Row
— Unmarks the entire row containing the selected mix-point.
DSP Configurator Outputs
The outputs run along the top right of the main workspace in DSP Configurator. These
outputs receive signal when mix-point connections are made between an input and an
output in the mix-matrices.
Each output panel can be expanded or collapsed by clicking the (expand) or (collapse)
buttons.
figure 45. Mix-point Drop Down Menu