Extron electronics VLC 102 User Manual Download Page 67

Extron 

USA - West

Headquarters

+

800.633.9876

Inside USA/Canada Only

+1.714.491.1500
+1.714.491.1517

 FAX

Extron 

USA - East

+800.633.9876

Inside USA/Canada Only

+1.919.863.1794
+1.919.863.1797

 FAX

Extron 

Europe

+800.3987.6673

Inside Europe Only

+31.33.453.4040
+31.33.453.4050

 FAX

Extron 

Asia

+800.7339.8766

Inside Asia Only

+65.6383.4400
+65.6383.4664

 FAX

Extron 

Japan

+81.3.3511.7655
+81.3.3511.7656

 FAX

Extron 

China

+400.883.1568

Inside China Only

+86.21.3760.1568
+86.21.3760.1566 

FAX

Extron 

Middle East

+971.4.2991800
+971.4.2991880

 FAX

© 2011 Extron Electronics   All rights reserved.   

www.extron.com

Extron

®

 Warranty

Extron Electronics warrants this product against defects in materials and workmanship for a period of three years 
from the date of purchase. In the event of malfunction during the warranty period attributable directly to faulty 
workmanship and/or materials, Extron Electronics will, at its option, repair or replace said products or components, 
to whatever extent it shall deem necessary to restore said product to proper operating condition, provided that it is 
returned within the warranty period, with proof of purchase and description of malfunction to:

USA, Canada, South America, 

and Central America: 

Extron

 

Electronics 

1001 East Ball Road 
Anaheim, CA 92805 
U.S.A.

 

Japan: 

Extron Electronics, Japan 
Kyodo Building, 16 Ichibancho 
Chiyoda-ku, Tokyo 102-0082 
Japan

Europe, Africa, and the Middle 

East: 

Extron Europe 
Hanzeboulevard 10 
3825 PH Amersfoort 
The Netherlands

China: 

Extron China 
686 Ronghua Road 
Songjiang District 
Shanghai 201611 
China

Asia: 

Extron Asia 
135 Joo Seng Road, #04-01 
PM Industrial Bldg. 
Singapore 368363 
Singapore

Middle East: 

Extron Middle East 
Dubai Airport Free Zone 
F12, PO Box 293666 
United Arab Emirates, Dubai

This Limited Warranty does not apply if the fault has been caused by misuse, improper handling care, electrical or 
mechanical abuse, abnormal operating conditions, or if modifications were made to the product that were not 
authorized by Extron.

NOTE:

  If a product is defective, please call Extron and ask for an Application Engineer to receive an RA (Return 

Authorization) number. This begins the repair process.

USA

:  (714) 491-1500 

Europe

:  +31.33.453.4040  

Asia

:  +65.6383.4400 

Japan

+81.3.3511.7655 

Units must be returned insured, with shipping charges prepaid. If not insured, you assume the risk of loss or damage 
during shipment. Returned units must include the serial number and a description of the problem, as well as the 
name of the person to contact in case there are any questions.

E

xtron

 

Electronics makes no further warranties either expressed or implied with respect to the product and its quality, 

performance, merchantability, or fitness for any particular use. In no event will Extron Electronics be liable for direct, 
indirect, or consequential damages resulting from any defect in this product even if Extron Electronics has been 
advised of such damage.

Please note that laws vary from state to state and country to country, and that some provisions of this warranty may 
not apply to you.

Warranty

Contact Information

Contents

Warranty .............................................................v
Contact Information ............................................v

Summary of Contents for VLC 102




































































Reviews: