VoiceLift System • Reference Information
58
58
58
•
Pass-Thru
(via
MLC
104
IP
or
226
IP)
:
Select this option if the receiver is
connected indirectly to an MLC 104 IP Plus or an MLC 226 IP via a PoleVault
switcher.
Figure 44.
Add Device Window for an MLC Pass-through Connection
a.
In the
MLC’s
IP
Address
or
Hostname
field, enter the IP address of the MLC.
Enter the Telnet port number in the
Port
field.
b.
If a password for the MLC exists, enter it in the
Admin Password
field.
c.
Click
Connect
. The
Connected Device
field displays the MLC type and IP
address, the pass-through port number, and “VLR 102” followed by a check
mark.
d.
If you want to edit the pass-through port number, click
Edit
Port
. The port
number becomes a text field, in which you can enter the new port number.
5.
(Optional) In the Path field in the New Firmware File (Optional) section, you can enter
the path to the new VLR 102 firmware file on your computer or click
Browse
to locate
and open the file (by default, the firmware file is placed at
C:\Program Files\
Extron\Firmware\VLR_102
when downloaded from the Extron website).
NOTE:
You can also locate and add the firmware file on the Firmware Loader
main window.
6.
(Pass-through only) Click
Add
Next
if you intend to add more devices to the Firmware
Loader. When you click
Add Next
, the device you entered on the Add Device window
is displayed on the Firmware Loader window and the Add Device window continues
to be displayed.
7.
Click
Add
to close the Add Device window and display the selected device on the
Firmware Loader window.
8.
If you did not add a firmware file in step
5
, on the Firmware Loader window
double-click on
<double
click
to
set>
in the
New Firmware File
column (see
figure 45).