Installation, cont’d
TPS150 Switching and Transmission System
•
Installation
2-2
Installation
Mounting the Transmitter and Receiver
The TPS150 comes with rubber feet for the transmitter and receiver, a set of
MTR102 rack ears for the transmitter, and a set mounting brackets for the receiver.
Rack mounting the transmitter
If desired, rack mount the transmitter as follows:
1
.
Remove the rubber feet from the bottom of the transmitter.
2
.
Attach the 992546-2 rack mounting ears to the transmitter with the six
provided #8 machine screws (figure 2-1).
3
.
Insert the transmitter into the rack, aligning the holes in the mounting bracket
with those of the rack.
# 8 Screw (6 Plcs)
Each Side
IN
PU
T S
EL
EC
T
1
2
3
4
BL
AN
K
MU
TE
PO
W
ER
PR
OJ
EC
TO
R
PO
W
ER
VO
LU
ME
TPT15
0
A
/V S
witc
her
/ T
wist
ed
Pa
ir T
ran
sm
itter
Figure 2-1 — Mounting the transmitter
4
.
Secure the transmitter to the rack using the supplied machine screws.
Projector mounting the receiver
If desired, projector mount the receiver as follows:
1
.
Remove the rubber feet from the bottom of the receiver.
2
.
Attach the supplied 992547-2 projector pole mounting brackets to the receiver
with the four provided #8 machine screws (figure 2-2).
