TP Receivers • Specifications, Accessories, and Part Numbers
A-3
Audio
Number/signal type ..................... 1 or 2 sets of analog proprietary signals
Connectors ..................................... 1 or 2 shielded RJ-45 female
Frequency response ...................... 20 Hz to 20 kHz, >±0.05 dB
THD + Noise .................................. 0.03% @ 1 kHz, 0.3% @ 20 kHz at
maximum output (unweighted)
S/N .................................................. >63 dB at nominal level
Crosstalk ......................................... <-80 dB @ 1 kHz, fully loaded
Stereo channel separation ............ >80 dB @ 1 kHz
CMRR .............................................. >33 dB @ 20 Hz to 20 kHz
Audio input— refer to the TP Transmitters Family
User’s Manual, part #68-546-02
N
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV
≈
2 dBu
Audio output
Number/signal type
TP R BNC A ........................ 1 stereo audio balanced/unbalanced, and
1 stereo audio unbalanced
TP R 15HD A ...................... 1 stereo audio balanced/unbalanced
TP R BNC AV ..................... 2 stereo audio balanced/unbalanced, and
2 stereo audio unbalanced
Connectors
TP R 15HD A ...................... (1) 3.5 mm, 5-pole captive screw connector
per input
All other models ................ 2 female RCA (left/right) per input
(1) 3.5 mm, 5-pole captive screw connector
per input
Impedance ...................................... 50 ohms unbalanced, 100 ohms balanced
Gain error ....................................... ±0.1 dB channel to channel
Maximum level (600 ohm) ........... >+11.5 dBm, balanced at 1%THD+N
General
Recommended cable type ............ Enhanced Skew-Free™ A/V UTP Cable or
CAT 5/5E/6 (shielded or unshielded)
Power
TP R BNC AV ..................... 100 VAC to 240 VAC, 50-60 Hz, 40 watts,
internal
External power supply
All models except TP R BNC AV
100 VAC to 240 VAC, 50-60 Hz, external; to
15 VDC, 0.8 A, regulated
