TP Receivers • Installation and Operation
Installation and Operation, cont’d
2-10
Furniture mounting
All receiver models can be mounted under furniture such
as a table or podium surface using the appropriate optional
mounting bracket; the Extron Under-Desk Mounting Kit for 1/8
and 1/4 Rack Width Products (part #
70-212-01
) (
TP R 15 HD A
)
or Under-Desk Mounting Kit for 1/2 Rack Width Products (part
#
70-077-01
) (
all other models
).
All models except the TP R 15HD A can be mounted through
a table or podium using an Extron Through-Desk Mounting
Kit for quarter or half Rack Width Products (part #
70-077-02
).
Furniture mount the receiver as follows:
1
.
Attach the mounting brackets to the receiver with the
machine screws provided (figure 2-5).
Extron
TP R BNC A
Extron
TP R BNC A
Extron
TP R 15HDA
RG
B I
NP
UT
RG
B O
UT
PU
T
R
G
B
H/H
V
V
A
AU
DIO
L
R
B
SO
G
C SYNC
PO
WE
R
15V .
5A DC
L
R
RG
B I
NP
UT
RG
B O
UT
PU
T
R
G
B
H/H
V
V
A
AU
DIO
L
R
B
SOG
C SY
NC
PO
WE
R
15V
.5
A D
C
L
R
Through-desk
Mounted
Under-desk
Mounted
Under-desk
Mounted
TP R 15HD
A
RGB
PEA
KIN
G
LEV
EL
Figure 2-5 — Under-desk or through-desk mounting
2
.
For through-surface mounting (all except TP R 15HD A)
,
cut the proper sized hole in the mounting surface.
3
.
Hold the receiver with the attached brackets against the
underside of the table or other furniture. Mark the location
of the screw holes of the bracket on the mounting surface.
4
.
Drill 3/32 inch (2 mm) diameter pilot holes, 1/4 inch
(6.3 mm) deep in the mounting surface at the marked
screw locations.
