Mounting to Drywall or Furniture
Figure 26 shows how to mount the TLP Pro 300M in drywall. Follow the same procedure to
mount into furniture.
NO
RTH
AMERIC
A
NO
RT
H
AMERIC
A
TLP Pro 300M
Wall
Metal
Mounting
Plate
Toothed
Clamping
Plate
#6-32 x 1½"
flat-head screws
1
1
1
2
2
2
Figure 26.
Mounting the TLP Pro 300M to Drywall or Furniture
1.
Download the
TLP Pro 300M Cut-out Template
from
. Ensure that it is
printed at 100% size, with no scaling.
2.
Remove the cut-out area from the template.
3.
Attach the template to the wall in a suitable location, using a level to ensure the template is
aligned correctly.
4.
Use the template to mark and remove the cut-out area (
1
) and drill two holes (
2
) for the
screws that secure the toothed clamping plates.
5.
If you are using a tether kit to deter theft, one loop of the tether kit should be secured to a
wall stud.
6.
Run cables to the installation site as required.
7.
Secure the metal mounting plate to the clamping plates, using the #6-32 x 1½" flat-head
screws. The mounting plate, clamping plates, and screws are all provided.
As the screws turn they tighten the grip of the clamping plates on the inside surface of the
drywall.
8.
Attach cables to the back of the TLP Pro 300M (see
9.
If a tether kit is being used, loosen the security screw on the back panel ((see
, on page 6) just enough to insert the loop of the tether kit.
10.
Tighten the screw to clamp the tether in place.
11.
Attach the touchpanel to the metal mounting plate. The touchpanel is held in place by
magnets.
TLP Pro 300M • Mounting
27
Summary of Contents for TouchLink TLP Pro 520M
Page 6: ......