1
Product Category
IMPOR
TANT
:
Go to ww
w.extr
on.com for th
e
complete user guide and installation
instructions befor
e connecting the
product to the power sou
rce.
TLP Pro 1220TG and TLP Pro 1520TG • Setup Guide
Overview
The Extron TLP Pro 1220TG is a 12.1 inch tabletop touchpanel with a high resolution 1280x800 capacitive touch screen. The
TLP Pro 1520TG is a 15.6 inch tabletop touchpanel with a high resolution 1366x768 capacitive touch screen. They are ideal for any
AV applications requiring large touchpanels with flexible mounting options and fully customizable interfaces. This guide provides
instructions for experienced installers to mount and install a TLP Pro 1220TG or TLP Pro 1520TG touchpanel. For more complete
instructions, see the
TLP Pro 1220 Series and TLP Pro 1520 Series User Guide
at
www.extron.com
.
Setup Checklist
Get Ready
Download and install the latest version of the following software:
GUI Designer
— for designing layouts for Extron TouchLink
®
Pro touchpanels and third party touch interfaces.
Global Configurator
®
Plus and Professional
— for setting up and configuring the control processor and touchpanel.
Toolbelt
— provides device discovery, device information, firmware updates, and configuration of network settings, system
utilities, and user management for TouchLink Pro devices.
All three software programs are available from
www.extron.com
.
Obtain the following network information from your network administrator:
DHCP status (on or off). If DHCP is off, you will also require
IP address
Subnet mask
Gateway
User name — by default these are either
admin
or
user
.
Passwords — by default these are either
extron
(for admin) or the field is left blank (for user).
Make a note of the touchpanel MAC address.
Mount and Cable All Devices
ATTENTION:
•
Do not power on the touchpanels or control processors until you have read the Attention in the Power Supply section of
the
TLP Pro 1220 Series and TLP Pro 1520 Series User Guide
or the
IPL Pro User Guide
.
•
Ne branchez pas les écrans tactiles ou les contrôleurs avant d’avoir lu la mise en garde dans la section « sources
d’alimentation » du
TLP Pro 1220 Series and TLP Pro 1520 Series User Guide
ou du
IPL Pro User Guide
.
Mount the units. There are several mounting options for TouchLink Pro touchpanels (see
Mounting
on the following page).
Connect cables to the touchpanels. To connect cables, remove the back and base covers (see
figure 3
). For more information
about the cable connectors, see
Rear Panel Features
on page 3.
Connect the power cords and power on all devices.
Set up the Touchpanels for Network Communication
Connect the PC that you will use for setup, the control processor, and touchpanel
to the same Ethernet subnetwork
.
Use the
Setup Menu
(see page 4) or Toolbelt to set the DHCP status and, if necessary, the IP address, subnet mask, gateway,
and related settings for the touchpanel.
Configure the Touchpanels
The
GUI Designer Help File
,
Global Configurator Help File
, and the
Toolbelt Help File
provide step‑by‑step instructions and more
detailed information. The
Global Configurator Help File
includes an introduction to the software and sections on how to start a
project and configuration.
